Henderson Merlin garage door T-Handle

£20.00 Inc. VAT & Shipping

Specification

  • Spigot length 35mm.
  • Spigot fixings are spaced 51mm apart (Approx).
  • 30mm Shaft
  • Silver painted finish.
  • Supplied with two keys and fixing screws.

Description

Henderson Merlin garage door T-Handle

Here we have a Henderson Merlin garage door T-Handle with a 30mm – 45° diamond shaft and long spigots to suit Henderson canopy doors manufactured prior to September 1987.

Spigot length 35mm.

Spigot fixings are spaced 51mm apart (Approx).

Silver painted finish.

Supplied with two keys and fixing bolts.

Not suitable for Premiere doors manufactured from February 1992.

Fitting Instructions:

To replace the Henderson Merlin T-Handle you will need the following items:

Flat Head Screwdriver, 12″ of Gaffer Tape

  1. With the door in the closed position place tape over the top of the existing handle and secure each side to the door panel to ensure the handle does not drop off when you loosen the screws.
  2. Inside, with the door open remove the flat head screws and place to on side.
  3. Outside, partially close the door and hold it with your leg to stop it returning to the open position. Now remove the tape holding the now loose handle in place.
  4. Note the position of the handle and push the new handle through the hole and tape it securely. Now raise the door to the open position.
  5. Insert and tighten the screws then from the inside close the door and check it is latching properly.
  6. Outside, remove the gaffer tape.
  7. Check the key works and locks the door.

If you are not confident doing this work yourself then book an appointment for one of our Engineers to do it for you.


Additional information

Brand

Henderson

You may also like…

Henderson Merlin garage door T-Handle
Henderson Merlin garage door T-Handle
£20.00 Inc. VAT & Shipping
Tap to Call