SWS Seceuroglide remote control transmitter – Smooth Black

£58.80 inc. VAT

This is the newer keyfob remote used after the earlier PDT control system was replaced.

  • 2 Buttons
  • Smooth Black
  • Instructions below
SKU: SWR1020 Categories: , Tags: , ,

Description

This is the newer keyfob remote used after the earlier PDT control system was replaced.

A two channel 868MHz remote control handset with rolling code technology and a black coloured case to suit current SWS Seceuroglide roller doors.

Suits this control box:

Programming Instructions:

Remove the cover from the front of the control box (above) to reveal the control board and the P1 (Mem) button in white.

Adding a transmitter: Mode 1 – Up/stop/down
Action
• Press “P1” button on receiver once and hold (long beep)
• Press button on transmitter (short beeps)

 

Adding a transmitter: Mode 2 – Up on one button/Down on another button
Action
• Press “P1” button on receiver twice and hold on the second
press (long beep)
• Press button on transmitter(short beeps)

Programming the Light: Mode 3 – Toggle light on and off
Action
• Press “P1” button on receiver three times and hold on the third
press
• Press button on transmitter (short beeps)


 

Additional information

Brand

SWS, Seceuroglide

You may also like…